Thank you for choosing your axept® GO terminal from us.
axept® GO utilises the PAX A920 terminal and is designed to process transactions as quickly as possible via a Wi-Fi or cellular connection. This user guide is designed to provide users of the PAX A920 with everything they need to install their terminal, SIM and Receipt roll
Before starting to use axept® GO, it is recommended that you take a few moments to check the contents of the box. Every axept® GO package should include:
- axept® GO Terminal (PAX A920)
- UK USB AC Adapter
- USB Charging Cable
- Thermal Paper Roll
Receipt Roll Installation
The A920 terminal accepts standard 57mm wide x 40mm diameter Thermal Till Rolls. Installation is a simple process.
Firstly, open the terminals receipt compartment by carefully lifting the release catch as shown.
Once open, place the receipt roll provided into the open compartment with the receipt paper extending from underneath the roll leaving at least 1cm exposed and close the cover.
The receipt roll is then loaded and ready for printing.
SIM Card Installation
If the terminal is required to utilise a cellular connection the SIM card will need to be installed and the APN (Access Point Name) details configured to allow the SIM to connect to the internet.
To physically install the SIM please follow the below instructions.
Slide back the cover release catch on the rear of the terminal and remove the battery cover. Lift the battery at the bottom (by the white arrow) and remove it from the terminal.
Insert the SIM card in the slot as shown below. Notice that the SIM card is inserted with the metal contacts facing down, and the notched corner at the top right. Once installed, re-insert the battery and replace the cover, locking it in place.
If you need any assistance with these instructions, you can contact our Customer Support team via the details below.
Optomany Customer Support
|+44 (0) 20 8102 8000
For further information on connecting your new terminal to Wi-Fi and processing transactions, please see the axept® GO Guide